Centrifuge
- Principle
-
- The processing liquid continuously flows into the rotating body through the contaminated liquid inlet and is subject to strong centrifugal force.
- Solids are pushed against the inner wall of the rotating body, are separated, are settled, and are accumulated. If the rotating body is full of solids, the cleaning device must be stopped and cleaned. (If you unscrew the lid of the rotating body, the settled solids can be easily removed by your hands.)
- The clean liquid from which solids have been removed is returned to the processing fluid supply device.
- Application
-
- Various machine tools: Purification of processing fluid and separation of cut chips, honing machine, gun drill machine, super finishing machine, electric discharge machine, precision polishing machine, electrolytic polishing machine, gear polishing machine, header valve, dedicated machine, cleaning machine, cutter, centares polishing machine, semiconductor related processing equipment, etc.
- Lens, prism processing machine, glass processing machine
- Removal of metal dust, rust, sand, sludge, and seal debris in hydraulic oil and refrigeration oil.
- Primary treatment of drainage: Separation of debris in the paint booth tank, removal of mud, sand, and other solids in the drain.
| Flux (ℓ/min) | SF-20N | SF-50N,S,A | SF-100N,S,A | SF-200S,A | PSF-100A | PSF-200A | PSF-400A |
|---|---|---|---|---|---|---|---|
| 5 | 5 | 2 | 1 | 1 | 1 | 1 | 1 |
| 10 | 7 | 3 | 1 | 1 | 1 | 1 | 1 |
| 20 | 10 | 5 | 2 | 1 | 2 | 1 | 1 |
| 30 | (15) | 7 | 3 | 1 | 3 | 1 | 1 |
| 50 | 10 | 5 | 3 | 5 | 3 | 1 | |
| 75 | (15) | 7 | 4 | 7 | 4 | 3 | |
| 100 | 10 | 5 | 10 | 5 | 4 | ||
| 150 | (30) | 7 | (30) | 7 | 5 | ||
| 200 | 10 | 10 | 7 | ||||
| 400 | 10 |
* The table above shows values from experiments. The separation effect may vary slightly depending on the viscosity of the liquid and the specific gravity of the particles.
